Administration
RMON
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 170
2
show rmon statistics
Use this command in Privileged EXEC mode to display RMON Ethernet Statistics.
show rmon statistics {ethernet interface | port-channel port-channel-number}
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following fields display.
Parameter Description
interface Valid Ethernet unit/port.
port-channel-
number
Valid port-channel trunk index.
Dropped An index that uniquely identifies the event.
Octets A comment describing this event.
Packets The time this entry was created.
Broadcast The total number of good packets received and directed to
the Broadcast address. This does not include Multicast
packets.
Multicast The total number of good packets received and directed to
a Multicast address. This number does not include packets
directed to the Broadcast address.
CRC Align
Errors
The total number of packets received with a length
(excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but with either a bad
Frame Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral number
of octets (Alignment Error).