Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 141
2
Syntax Descriptions
Default
severitylevel—critical (2).
Command Modes
Global Config
Related Commands
logging host
Use this command to enable logging to a host (syslog server). You can configure
up to eight logging hosts.
logging host addresstype {ipaddr | hostname} [port] [severitylevel]
Parameter Description
severitylevel The severity level of the traps to be logged. You can
specify an integer from 0 to 7 or one of the following
keywords:
• emergency (0)
• alert (1)
• critical (2)
• error (3)
• warning (4)
• notice (5)
• info (6)
• debug (7)
Command Description
logging console
enable
Enables logging to a terminal connected to the console
port.