Cisco Small Business 200 Series

Administration
RMON
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 155
2
Related Commands
RMON
Smart switch supports Remote Monitoring (RMON) for collecting data about
network traffic. A device that supports gathering and reporting the RMON data is
referred to as an RMON probe or RMON Agent. An RMON probe provides RMON
data to an RMON Manager for analysis and presentation to the User. This section
describes the RMON commands.
rmon alarm
Use this command to configure alarm conditions. Use the no form of the command
to remove an alarm.
rmon alarm index variable interval rthreshold fthreshold revent fevent [type type] [startup
direction] [owner name]
no rmon alarm index
Syntax Descriptions
Number of
Traps Since Log
Last Viewed
The number of new traps since the command was last
executed.
Log The log number.
System UP Time System up time.
Trap The text of the trap message.
Command Description
show logging Displays logging configuration information.
Parameter Description
index The alarm index. The range is 1–300.