Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 59
2
User Logins and Passwords
password
The currently logged-in user can use this command to change the password. This
command can be used after the password has aged-out or at any time to change
the user’s password. The user is prompted to enter the old password and the new
password. The change is effective upon the next log-in.
password
Command Modes
Privileged Exec
Related Commands
passwords aging
Use this command to implement aging on passwords for local users. When a
user's password expires, the user is prompted to change it before logging in again.
Use the no form of the command to reset it to the default value (180 days). If it is
set to 0, password aging is disabled.
passwords aging 0-365
no passwords aging
Syntax Descriptions
Command Description
passwords min-
length
Enforces a minimum password length for local users.
passwords aging Implement aging on passwords for local users.
show passwords
configuration
Displays the configured password management settings.
Parameter Description
0-365 The number of days. The range is 0–365.