Cisco Small Business 200 Series

VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 240
4
show lldp med remote-device
Use this command to display the summary information about remote devices that
transmit current LLDP-MED data to the system. You can show information about
LLDP-MED remote data received on all valid LLDP interfaces or on a specific
physical interface.
show lldp med remote-device {interface | all}
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following command shows LLDP remote data received on all interfaces.
(Switch) #show lldp remote-device all
LLDP Remote Device Summary
Local
Interface RemID Chassis ID Port ID System Name
------- ------- ----------------- ------------------ -----------------
-
e1
e2
e3
e4
e5
e6
e7 2 00:FC:E3:90:01:0F 00:FC:E3:90:01:11
e7 3 00:FC:E3:90:01:0F 00:FC:E3:90:01:12
e7 4 00:FC:E3:90:01:0F 00:FC:E3:90:01:13
e7 5 00:FC:E3:90:01:0F 00:FC:E3:90:01:14
e8
.
.
.
e24
Parameter Description
interface The interface ID.
all Shows data received on all LLDP interfaces.