Cisco Small Business 200 Series

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 206
3
Syntax Descriptions
Default
By default all LAGs are administratively enabled.
Command Modes
Global Config
Related Commands
port-channel load-balance
This command selects the load-balancing option used on a LAG. Traffic is
balanced on a LAG by selecting one of the links in the channel over which to
transmit specific packets. The link is selected by creating a binary pattern from
selected fields in a packet and associating that pattern with a particular link. Use
the no form of the command to reset it to the default value.
port-channel load-balance {1 | 2} {interface | all}
no port-channel load-balance {interface | all}
Parameter Description
all Configures all LAGs with the same administrative mode
setting.
Command Description
show port-
channel brief
Displays the static capability of all LAG interfaces on the
device as well as a summary of individual LAG interfaces.
show port
channel
Displays an overview of all port-channels (LAGs) on the
switch.