Cisco Small Business 200 Series

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 207
3
Syntax Descriptions
Default
The default load-balance is method 2.
Command Modes
Global Config
Interface Config
Related Commands
Parameter Description
1 Load balances based on the source/destination MAC,
VLAN, EtherType, and incoming port associated with all
packets.
2 Load balances based on the source/destination IP and
source/destination TCP/UDP Port fields of IP packets, and
falls back to Source/Destination MAC for non IP packets.
interface LAG identifier.
all In Global Config Mode, this option applies the command to
all currently configured LAGs.
Command Description
show port-
channel brief
Displays the static capability of all LAG interfaces on the
device and a summary of individual LAG interfaces.
show port
channel
Displays an overview of all LAGs on the switch.