Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 148
2
Related Commands
logging syslog port
Use this command to specify the logical port number for the syslog client on the
switch. Use the no form of the command to reset the syslog client port number to
the default.
logging syslog port portid
no logging syslog port portid
Syntax Descriptions
Default
portid—514.
Command Modes
Global Config
Related Commands
Command Description
logging syslog
enable
Enables the syslog client on the switch.
logging syslog
port
Specifies the logical port number for the syslog client on
the switch.
show logging Displays logging configuration information.
Parameter Description
portid The port number of the syslog client on the switch, which
is an integer in the range 1025–65535.
Command Description
logging syslog
enable
Sets the facility for logging messages.