Cisco Small Business 200 Series User Manual

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 346
8
Default
802.1X Port Control is enabled in auto mode.
Command Modes
Interface Config
Related Commands
dot1x port-control all
Use this command to enable the IEEE 802.1X operation on all the ports. Use the no
form of the command to reset the mode to the default value (auto).
dot1x port-control all {force-unauthorized | force-authorized | auto}
no dot1x port-control all
force-authorized The authenticator PAE unconditionally sets the controlled
port to authorized.
auto The authenticator PAE sets the controlled port mode to
reflect the outcome of the authentication exchanges
between the supplicant, authenticator and the
authentication server.
Command Description
dot1x port-
control
Enables the IEEE 802.1X operation on all the port.
show dot1x Shows a summary of the global 802.1X configuration,
summary information of the 802.1X configuration for a
specified port or all ports, the detailed 802.1X
configuration for a specified port, and the 802.1X statistics
for a specified port.
Parameter Description

Cisco Small Business 200 Series Specifications

General

Brand	Cisco
Model	Small Business 200 Series
Category	Switch
Language	English