Cisco Small Business 200 Series

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 340
8
show radius statistics
Use this command to display the summary statistics for configured RADIUS
Authenticating servers.
show radius statistics {ip-address | dnsname}
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show radius statistics 10.172.69.32
RADIUS Server Name............................. Default-RADIUS-Server
Server Host Address............................ 10.172.69.32
Access Requests................................ 0
Access Retransmissions......................... 0
Access Accepts................................. 0
Access Rejects................................. 0
Access Challenges.............................. 0
Malformed Access Responses..................... 0
Bad Authenticators............................. 0
Pending Requests............................... 0
Timeouts....................................... 0
Unknown Types.................................. 0
Packets Dropped................................ 0
Parameter Description
ip-address The IP address of the RADIUS server.
dnsname The hostname of the RADIUS server. To specify a
hostname, ensure that the DNS client capability is
configured on the switch.
RADIUS Server
Name
The DNS name of the server.
Server Host
Address
The IP address of the server.