Cisco Small Business 200 Series

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 339
8
Related Commands
Message
Authenticator
A global parameter to indicate whether the Message
Authenticator attribute is enabled or disabled.
Time Duration The configured timeout value, in seconds, for request
retransmissions.
RADIUS
Attribute 4
Mode
A global parameter to indicate whether the NAS-IP-Address
attribute has been enabled to use in RADIUS requests.
RADIUS
Attribute 4
Value
A global parameter that specifies the IP address to be used
in NAS-IP-Address attribute used in RADIUS requests.
Command Description
radius server host Configures the IP address or DNS name of a RADIUS
server.
radius server key Configures the key to be used in RADIUS client
communication with the specified server.
radius server
priority
Specifies the order in which the servers are to be used.
radius server
attribute nas-ip-
addr
Specifies the RADIUS client to use the NAS-IP Address
attribute in the RADIUS requests.
radius server
msgauth
Enables the message authenticator attribute to be used for
the specified RADIUS Authenticating server.
radius server
retransmit
Globally configures the number of unsuccessful
transmissions of RADIUS messages that the client must
make before it attempts to use the fall back server.
radius server
timeout
Globally configures the timeout value (in seconds) after
which the RADIUS client must retransmit to the RADIUS
server if no response is received.