Cisco Small Business 200 Series

SNMP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 425
11
Related Commands
show snmp engineid
This command displays the SNMP engine ID for the switch.
show snmp engineid
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show snmp engineid
Local SNMP engineID : 000000630300abcd142e4e0000000000
Related Commands
show snmp users
Use this command to display the configuration of users.
show smnp users [username]
Syntax Descriptions
Command Description
snmp trap link-
status all
Enables link status traps by interface.
Command Description
snmp-server
engineID local
Specifies the Simple Network Management Protocol
(SNMP) engine ID on the switch.
Parameter Description
username The name of the user. If no user name is specified,
configuration information for all users displays.