Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 134
2
Related Commands
Syslog
The switch generates messages in response to events, faults, or errors occurring
on the platform and to changes in configuration or other occurrences. These
messages are stored both locally in system memory and can be forwarded to one
or more centralized points of collection (i.e., a syslog server) for monitoring
purposes or long-term archiving. This section describes the commands you can
use to configure and view the system logs.
clear logging buffered
Use this command to clear messages from the in-memory logging buffer.
clear logging buffered
Command Modes
Global Config
Related Commands
Command Description
set hostname Configures a name for the switch.
set contact Configures a contact name for the switch.
set location Configures a description of the switch location.
show clock Shows clock configuration details.
show language
pack detail
Shows details on the available and active language packs
on the switch.
Command Description
logging buffered Limits log messages displayed from an in-memory buffer
based on severity.