Cisco Small Business 200 Series

MAC Address Tables
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 290
6
show mac-addr-table dynamic
Use this command to display dynamic entries in the bridge-forwarding database.
show mac-addr-table dynamic [vlan-id]]interface]
Syntax Descriptions
Command Modes
Privileged Exec
Examples
In this example, all static entries in the bridge-forwarding database are displayed.
(switch) #show mac-addr-table dynamic
VLAN MAC Address Interface Status
---- ----------------- --------- ------------
1 00:00:10:60:43:A2 e1 Learned
1 00:02:BC:00:00:77 e1 Learned
1 00:02:BC:11:01:79 e1 Learned
1 00:0F:FE:03:8D:57 e1 Learned
1 00:0F:FE:03:9B:F1 e1 Learned
1 00:0F:FE:08:8D:CD e1 Learned
1 00:10:18:53:03:F4 e1 Learned
1 00:10:18:58:36:01 e1 Learned
1 00:10:18:80:04:5B e1 Learned
1 00:10:18:80:04:5D e1 Learned
1 00:11:88:58:60:32 e1 Learned
clear mac-addr-
table
Removes any learned entries from the forwarding
database.
show mac-addr-
table static
Displays static entries in the bridge-forwarding database.
show mac-addr-
table dynamic
Displays dynamic entries in the bridge-forwarding
database.
Parameter Description
vlan-id Shows dynamic forwarding database entries in the
specified VLAN. The range is 1–4094.
interface Displays dynamic MAC addresses on a specific interface.
Command Description