Cisco Small Business 200 Series

Port Management
Switch Ports
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 175
3
Default
Auto-negotiation is enabled.
Command Modes
Global Config
Examples
The following command enables 10h and 100h autonegotiation on all ports:
(Switch) (config)#auto-negotiate all 100h
Related Commands
mtu
Use this command to set the maximum transmission unit (MTU) size, in bytes, for
frames that ingress or egress the interface. Use the no form of the command to
reset it to the default value (1518). You can use the mtu command to configure
jumbo frame support for physical and Link Aggregation Group (LAG) interfaces.
mtu 1518-2048
no mtu
Syntax Descriptions
Default
mtu—1518 bytes (untagged)
Command Description
auto-negotiate Enables auto-negotiation on a port.
show port Displays information about auto-negotiation
advertisement.
Parameter Description
1518–2048 The MTU size in bytes.