Cisco Small Business 200 Series

IP Configuration
DNS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 413
10
Related Commands
show hosts
Use this command to display the default domain name, a list of name server hosts,
the static and the cached list of hostnames and addresses. name ranges from 1-
255 characters. This command displays both IPv4 and IPv6 entries.
show hosts
Command Modes
Privileged Exec
Examples
The following example shows the output for this command.
(Switch) #show hosts
hostname....................................... host1
Default domain................................. Domain name is not configured
Default domain list............................ Domain Name List is not configured
Domain Name Lookup............................. Enabled
Number of retries.............................. 2
Retry timeout period........................... 3
Name servers (Preference order)................ 10.131.138.20
Configured hostname-to-address mapping:
Host Addresses
--------------------- ----------------------
host1 10.131.11.7
host2 10.131.11.9
Host Total Elapsed Type Addresses
Command Description
ip host Defines static hostname-to-IPv4 address mapping in the
host cache.
show hosts Displays the default domain name, a list of name server
hosts, the static and the cached list of hostnames and
addresses.