Cisco Small Business 200 Series

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 349
8
Syntax Descriptions
Default
Supplicants are enabled in auto mode.
Command Modes
Interface Config
Related Commands
dot1x supplicant user
Use this command to configure an existing user as a supplicant user. Use the no
form of the command to delete the supplicant user.
dot1x supplicant user user
no dot1x supplicant user user
Parameter Description
force-
unauthorized
The authenticator PAE unconditionally sets the controlled
port to unauthorized.
force-authorized The authenticator PAE unconditionally sets the controlled
port to authorized.
auto The authenticator PAE sets the controlled port mode to
reflect the outcome of the authentication exchanges
between the supplicant, authenticator, and the
authentication server.
Command Description
dot1x supplicant
user
Configures the supplicant user.
show dot1x Shows a summary of the global 802.1X configuration,
summary information of the 802.1X configuration for a
specified port or all ports, the detailed 802.1X
configuration for a specified port, and the 802.1X statistics
for a specified port.