Cisco Small Business 200 Series

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 215
3
Examples
The following command shows information for all LAGs.
(Switch) #show port-channel brief
Logical Port-Channel Name Link State Trap Type Mbr Ports ActivePorts
Interface Flag
--------- ----------------- ---------- -------- ------- --------- ------------
ch1 lag1 Down Enabled Dynamic e2 , e3
ch2 lag2 Down Enabled Static e4
Related Commands
show port-channel system priority
Use this command to display the LAG system priority.
show port-channel system priority
Logical Intf The port name.
Port-Channel
Name
The LAG name.
Link State Indicates whether the LAG is up or down.
Trap Flag Indicates whether a trap is generated when the Link State
changes.
Type Indicates whether the LAG is a dynamic or static LAG.
Mbr Ports The ports that are members of the LAG, whether or not
they are currently active in the LAG.
Active Ports The ports that are active ports on the LAG.
Command Description
show port
channel
Displays an overview of all port-channels (LAGs) on the
switch.