Cisco Small Business 200 Series

VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 233
4
Related Commands
lldp med location-tlv elin-addr
Use this command to set the Emergency Location Identification Number (ELIN) to
be advertised in Location TLVs. Use the no form of the command to reset the ELIN
to NULL.
lldp med location-tlv elin-addr emergency-number
no lldp med location-tlv elin-addr
Syntax Descriptions
Default
No emergency number is configured.
Command Modes
Global Config
Examples
The following example configures and ELIN address.
(switch) (Config)#lldp med location-tlv elin-addr 5622086169
Command Description
lldp med location-
tlv co-ordinate
Sets the coordinate-based Location TLV, as defined by
RFC3825.
lldp med location-
tlv elin-addr
Sets the ELIN-address-based Location TLV to specify the
emergency number.
show lldp med
location-tlv
Shows the details of the Location TLVs configured.
Parameter Description
emergency-
number
The ELIN number. The range is 10–25 numeric characters.