Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 146
2
logging persistent size
Use this command to set logging size for persistent logging. Use the no form of the
command to reset the size to the default. This is relevant to operational logs.
logging persistent size 50-200
no logging persistent size
Syntax Descriptions
Default
size—200 entries
Command Modes
Global Config
Related Commands
logging syslog enable
Use this command to enable the syslog client on the switch. To disable the syslog
client, use the no form of this command.
logging syslog enable
no logging syslog enable
Default
The syslog client is disabled.
Parameter Description
50–200 The number of entries to store in the persistent log.
Command Description
logging persistent Configures persistent logging on the switch.
show logging
persistent
Displays persistent logging information and log entries.
show logging Displays logging configuration information.