Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 312
7
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show igmpsnooping mrouter vlan e15
Slot/Port...................................... e15
VLAN ID
2
4
Related Commands
show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the MFDB table.
show mac-address-table igmpsnooping
Command Modes
Privileged Exec
Parameter Description
interface The port on which to display IGMP snooping multicast
router information.
Interface The port on which multicast router information is being
displayed.
VLAN ID list of VLANs that this interface has statically being
configured or seen an mrouter.
Command Description
set igmp mrouter Configures the VLAN ID (vlan-id) that has the multicast
router mode enabled.