Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 88
2
serial databits
Use this command to specify the number of data bits per character for the console
connection. Use the no form of the command to reset it to the default value.
serial databits {7 | 8}
no serial databits
Default
Eight data bits per character
Command Modes
Line (Console) Config Mode
Related Commands
serial parity
Use this command to set the parity for the console connection. Use the no form of
the command to remove the parity setting.
serial parity {even | odd | none}
no serial parity
Default
parity bits—none
Command Modes
Line (Console) Config Mode
Command Description
serial baudrate Specifies the communication rate of the console port.
serial parity Sets the parity for the console connection.
serial stopbits Sets the number of stop bits for the console connection.
show serial Displays serial port communication settings.