Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 249
4
Examples
The following example shows command output.
(switch) #show auto-voip oui-based interface e1
Interface Auto VoIP Mode Port Status
--------- -------------- -----------
e1 Enabled Down
Related Commands
show auto-voip oui-table
Use this command to show all configured Organizationally Unique Identifiers
(OUIs) on the switch.
show auto-voip oui-table
Command Modes
Privileged Exec
AutoVoIP Mode The Auto VoIP mode on the interface.
Port Status The operational status of the port.
Command Description
auto-voip oui-
based
Enables the VoIP Profile on an interface.
auto-voip oui-
based all
Enables the VoIP Profile on all the interfaces of the switch.
show auto-voip
sessions
Displays the currently running protocol-based Auto VoIP
sessions on an interface or interfaces.