Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 273
5
NOTE This configuration is applicable only when spanning tree mode is MSTP.
Related Commands
spanning-tree port mode
Use this command to enable the spanning tree administrative mode on a specific
port. To disable it, use the no form of this command.
spanning tree port mode
no spanning tree port mode
Default
Spanning tree is enabled on all ports.
Command Modes
Interface Config
Related Commands
Command Description
show spanning-
tree mst
summary
Displays summary information about all multiple spanning
tree instances in the switch.
Command Description
spanning-tree Enables the operation mode of spanning tree.
spanning-tree
port mode all
Enables the spanning tree administrative mode for all the
ports.
show spanning-
tree
Displays spanning tree settings for the common and internal
spanning tree.
show spanning-
tree interface
Displays spanning tree settings and parameters for an
interface.