Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 310
7
Related Commands
VLAN ID The VLAN ID.
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the VLAN.
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on
the VLAN.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a
report from a particular group on a specific interface, which
is participating in the VLAN, before deleting the interface
from the entry. This value might be configured.
Maximum
Response Time
The amount of time in seconds the switch waits after it
sends a query on an interface, participating in the VLAN,
because it did not receive a report for a particular group on
that interface. This value might be configured.
Multicast
Router Expiry
Time
The amount of time in seconds to wait before removing an
interface that is participating in the VLAN from the list of
interfaces with multicast routers attached. The interface is
removed if a query is not received. This value might be
configured.
Command Description
set igmp Enables IGMP snooping on a particular VLAN.
set igmp fast-
leave
Enables or disable IGMP Snooping fast-leave admin mode
on a selected VLAN.
set igmp
groupmembershi
p-interval
Sets the IGMP Group Membership Interval time on a VLAN.
set igmp
maxresponse
Sets the IGMP Maximum Response time on a particular
VLAN.
set igmp
mcrtrexpiretime
Sets the Multicast Router Present Expiration time.