Cisco Small Business 200 Series

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 245
4
auto-voip oui-priority
Use this command to configure the class-of-service priority assigned to OUI-
based VoIP traffic. Use the no form of the command to reset the priority to the
default, the highest priority queue available on the system.
auto-voip oui-priority priority
no auto-voip oui-priority
Syntax Descriptions
Default
The highest priority queue available in the system.
Command Modes
Global Config
Related Commands
auto-voip oui-vlan Configures the VLAN to be assigned to OUI-based VoIP
traffic.
show auto-voip
oui-based
Displays the VoIP Profile settings on the interface or
interfaces.
Parameter Description
priority A class of service priority level to assign to OUI-based
VoIP packets. The range is 0-7, with 0 being the highest
priority.
Command Description
auto-voip oui-
based
Enables the VoIP Profile on an interface.
auto-voip oui-
based all
Enables the VoIP Profile on all the interfaces of the switch.
Command Description