Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 84
2
Default
SSH access is disabled.
Command Modes
Privileged EXEC
Related Commands
sshcon maxsessions
Use this command to configure the number of remote SSH connections allowed.
Use the no form of the command to return the maximum to the default (2 sessions).
sshcon maxsessions 0-2
no sshcon maxsessions
Default
maxsessions—2
Command Modes
Privileged EXEC
Related Commands
Command Description
ip ssh protocol Sets or removes protocol levels (versions) for SSH.
sshcon
maxsessions
Configures the number of remote SSH connections
allowed.
sshcon timeout Configures the SSH Login Inactivity Timeout in minutes.
show ip ssh Shows SSH configuration information.
Command Description
ip ssh server
enable
Enables management access through SSH.
ip ssh protocol Sets or removes protocol levels (versions) for SSH.