Cisco Small Business 200 Series

MAC Address Tables
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 287
6
clear mac-addr-table
Use this command to remove any learned entries from the forwarding database.
clear mac-addr-table
Command Modes
Privileged Exec
Related Commands
show mac-addr-table
Use this command to display the forwarding database entries. These entries are
used by the transparent bridging function to determine how to forward a frame.
Enter all or no parameters to display the entire table.
show mac-addr-table [{mac-address vlan-id | all | count | interface interface | vlan
vlan-id}
]
Syntax Descriptions
Command Modes
Privileged Exec
Command Description
show mac-addr-
table
Displays the forwarding database entries.
Parameter Description
mac-address Shows forwarding database entries for the specified MAC
address.
vlan-id Shows forwarding database entries in the specified VLAN.
all Shows all forwarding database entries.
count Displays summary information about the forwarding
database table.
interface Displays MAC addresses on a specific interface.