Cisco Small Business 200 Series

Security
MAC Based Port Security
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 367
8
Default
maxvalue—256
Command Modes
Interface Config
Related Commands
port-security reset port
Use this command to reset the port shutdown by Port Security. If port is not shut
down by port-security, then no action is taken.
port-security reset port
Command Modes
Interface Config
Related Commands
port-security violation action
Use this command to configure the port behavior for MAC addresses violating the
MAC based Port Security. Use the no form of the command to reset it to the
default values.
port-security violation action {discard | {discard-with-trap [rap seconds] |
{discard-with-shutdown}} {forward-no-learn}}
no port-security violation action
Command Description
show port-
security
Displays the port-security settings.
Command Description
show port-
security
Displays the port-security settings.