Cisco Small Business 200 Series

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 335
8
Related Commands
radius server timeout
Use this command to globally configure the timeout value (in seconds) after which
the RADIUS client must retransmit to the RADIUS server if no response is
received. Use the no form of the command to reset the timeout to the default.
radius server timeout seconds
no radius server timeout
Syntax Descriptions
Default
seconds—3
Command Modes
Global Config
Related Commands
Command Description
radius server host Configures the IP address or DNS name of a RADIUS
server.
show radius
servers
Displays summary data and details on RADIUS servers.
Parameter Description
seconds The timeout value after which a request must be
retransmitted to the RADIUS server if no response is
received. The range is 1–30 seconds.
Command Description
radius server host Configures the IP address or DNS name of a RADIUS
server.