Cisco Small Business 200 Series

Port Management
Switch Ports
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 180
3
e17 Enable 1000f, 100f, 100h, 10f, 10h
e18 Enable 1000f, 100f, 100h, 10f, 10h
The following example shows command output for a specific interface.
(switch) #show interface advertise ethernet e1
Port:e1
Type :
Link Status:Down
Auto Neg:Enable
1000f 100f 100h 10f 10h
----- ---- ---- ---- ----
Admin Local link Advertisement Y Y Y Y Y
Related Commands
show interface ethernet
Use this command to display detailed statistics for a specific interface or for the
entire switch.
show interface ethernet {interface | switchport}
Syntax Descriptions
Command Modes
Privileged Exec
Command Description
show port Displays port information.
auto-negotiate Enables auto-negotiation on a port.
Parameter Description
interface The port or LAG name.
switchport Displays information for all ports on the switch.