Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 63
2
passwords strength exclude-keyword
Configures the switch to check whether preconfigured keywords are used in a
password when a user attempts to create or change the password. The
preconfigured keywords are cisco and ocsic.
This security check is enforced only when the passwords strength check feature
is enabled (see the passwords strength-check command).
Use the no form of this command to disable checking for keyword usage in
passwords.
password strength exclude-keyword
no password strength exclude-keyword
Default
This feature is disabled.
Command Modes
Global Config
Usage Guidelines
When you enable this feature, the following warning displays if one or more
currently configured users violates the keyword strength setting.
Warning: Not all user(s) passwords comply with the current password strength
restriction(s).
passwords
strength
maximum
repeated-
characters
Configures the switch to check whether any character in
the password is repeated consecutively more than three
times.
passwords
strength-check
Enables the switch to perform the configured password
strength checks when users log in.
Command Description