Cisco Small Business 200 Series

Quality of Service
Class of Service Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 380
9
Related Commands
cos-queue min-bandwidth
Use this command to specify the minimum transmission bandwidth guarantee for
each interface queue. The total number of queues supported per interface is
platform-specific. Use the no form of the command to restore the default for each
queue's minimum bandwidth value.
The Interface-Config mode configuration takes precedence over the Global-
Config mode configuration.
cos-queue min-bandwidth bw-1 bw-2 … bw-n
no cos-queue min-bandwidth
Syntax Descriptions
Default
The minimum bandwidth guarantee for each queue is 0% of the link rate.
Command Modes
Global Config
Interface Config
Command Description
show
classofservice
trust
Displays the current trust mode setting for a specific
interface.
show vlan port Displays the default port priority for a specific interface.
vlan priority Configure the default port priority for a specific interface.
Parameter Description
bw-1... bw-n A percentage of link rate. The range is 0–100 percent. The
first value entered corresponds to queue 1, the second to
queue 2, and so on. A value of 0 indicates no guaranteed
minimum bandwidth for that queue. The sum of all values
entered must not exceed 100.