Cisco Small Business 200 Series

VLAN Management
VLAN
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 226
4
switchport trunk native-vlan
Use this command to set the native VLAN for an interface in trunk mode. The native
VLAN identifies the single untagged VLAN membership for a trunk port.
switchport trunk native-vlan 1-4094
Syntax Descriptions
Command Modes
Interface Config
Related Commands
show interfaces switchport
Use this command to display VLAN membership and related configuration
parameters for the port.
show interfaces switchport interface
Syntax Descriptions
Command Modes
Privileged Exec
Parameter Description
1–4094 The VLAN ID of the native VLAN.
Command Description
switchport trunk
allowed-vlan
Adds and removes a trunk port as tagged member of one
or more VLANs.
show interfaces
switchport
Displays switchport configuration.
Parameter Description
interface The interface ID.