Cisco Small Business 200 Series

VLAN Management
VLAN
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 227
4
Examples
The following example shows switchport configuration for an interface.
(switch) #show interfaces switchport e1
Port: e1
VLAN Membership mode:Trunk Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Admit All
Default Priority: 0
Port e1 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
1 Default Untagged Default
Static configuration:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Admit All
Port e1 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
1 Default Untagged
Related Commands
Command Description
switchport mode Configures the VLAN membership mode of a port.