Cisco Small Business 200 Series

Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 202
3
Command Modes
Global Config
Related Commands
port lacpmode
This command enables the Link Aggregation Control Protocol (LACP) on a port.
Use the no form of command to disable LACP on a port.
port lacpmode
no port lacpmode
Default
LACP mode operation is enabled on all ports.
Command Modes
Interface Config
Related Commands
Command Description
addport Adds a port to a LAG.
deleteport (Inter-
face Config)
Deletes a port from a LAG.
show port-
channel brief
Displays the static capability of all LAG interfaces on the
device and a summary of individual LAG interfaces.
Command Description
port lacpmode all Enables LACP on all physical ports.
port lacptimeout
(Interface Config)
Sets the timeout on a physical interface of a particular
device type.
port lacptimeout
(Global Config)
Sets the timeout for all interfaces of a particular device
type.