Cisco Small Business 200 Series

Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 113
2
Related Commands
show sntp
Use this command to display SNTP status.
show sntp
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(Switch) #show sntp
Last Update Time: Jan 1 05:30:00 1970
Last Unicast Attempt Time: Jan 1 05:30:00 1970
Last Attempt Status: Other
Broadcast Count: 0
Related Commands
Command Description
sntp client mode Enables Simple SNTP client mode and sets the mode to
either broadcast or unicast.
show sntp Displays SNTP settings and status.
show sntp client Displays SNTP client settings.
Command Description
sntp client mode Enables Simple Network Time Protocol (SNTP) client
mode and sets the mode to either broadcast or unicast.
sntp server Configures SNTP unicast servers.
show sntp client Displays SNTP client settings.
show sntp
configuration
Displays SNTP settings.