Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 295
7
Syntax Descriptions
Command Modes
Interface Config
Related Commands
macfilter adddest all
Use this command to add all the ports to the destination filter set for the MAC filter
with the given MAC address or IP address, and VLAN ID. Use the no form of the
command to remove all ports from the destination filter set.
macfilter adddest all {mac-address | ip-address} vlan-id
no macfilter adddest all {mac-address | ip-address} vlan-id
Parameter Description
mac-address The multicast MAC address, specified as a 6-byte
hexadecimal number in b1:b2:b3:b4:b5:b6 format.
ip-address An IPv4 address.
vlan-id A valid VLAN.
Command Description
macfilter adddest
all
Adds all the ports to the destination filter set for the MAC
filter with the given MAC address or IP address, and
VLANID.
macfilter Adds a static filter entry with MAC-layer station source
address or IP Group Address.
show mac-
address-table
staticfiltering
Displays the Static Multicast Filtering entries in the
Multicast Forwarding Database (MFDB) table.