Cisco Small Business 200 Series

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 94
2
Related Commands
management access-list
Use this command to define an access list for management and to enter the
Access List Config mode. In Access List Config mode, you can configure the
denied or permitted access conditions using the deny and permit commands. To
remove an access list, use the no form of this command.
management access-list access-list-name
no management access-list
Syntax Descriptions
Default
No access list.
Command Modes
Global Config
Command Description
management
access-list
Defines an access list for management and enters the
access-list configuration mode.
deny
permit
Sets conditions for the management access list.
show
management
access-list
Displays information about the configured management
access list.
Parameter Description
access-list-name The user-defined name of the access list.