Cisco Small Business 200 Series User Manual

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 154
2
show logging traplogs
Use this command to display the SNMP trap events and statistics. The Trap Log
capacity is 64 entries.
show logging traplogs
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show logging traplogs
Number of Traps Since Last Reset............... 11
Trap Log Capacity.............................. 64
Number of Traps Since Log Last Viewed.......... 11
Log System Up Time Trap
--- ------------------------ -----------------------------------------------
0 0 days 04:15:24 Failed User Login: Unit: 1 User ID: cisco
1 0 days 04:00:23 Failed User Login: Unit: 1 User ID: cisco
2 0 days 03:48:10 Failed User Login: Unit: 1 User ID: cisco
3 0 days 03:47:54 Failed User Login: Unit: 1 User ID: cisco
4 0 days 02:36:43 Failed User Login: Unit: 1 User ID: cisco
5 0 days 02:27:40 Failed User Login: Unit: 1 User ID: cisco
6 0 days 02:27:28 Failed User Login: Unit: 1 User ID: cisco
7 0 days 00:01:19 Cold Start: Unit: 0
8 0 days 00:00:42 Link Up: e1
9 0 days 00:00:23 Temperature change alarm: Sensor ID: 1 Event: 1
10 0 days 00:00:23 Temperature change alarm: Sensor ID: 0 Event: 1
clear logging
persistent
Clears messages from the persistent log memory and the
other versions.
Number of
Traps Since
Last Reset
The number of traps since the last boot.
Trap Log
Capacity
The number of traps the system can retain.
Command Description

Cisco Small Business 200 Series Specifications

General

Brand	Cisco
Model	Small Business 200 Series
Category	Switch
Language	English