Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 153
2
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following shows sample output for the command when the log type is
unspecified.
(switch) #show logging persistent
Persistent Logging : enabled
Persistent Log Size : 200
Persistent Log Count : 1
1995-11-26 19:29:10 CRIT LOG[LOG]: log_server.c(1827) 2 %% Log service
started
Related Commands
Parameter Description
startup Shows the startup log.
operational Shows the operational log.
0 | 1 | 2 Specifies the version of the log to display:
• 0—Shows the current log.
• 1—Shows the log of the most recent reboot.
• 2—Shows the log of the reboot prior to the most
recent.
Command Description
logging persistent
enable
Configures persistent logging on the switch.
logging persistent
severity
Configures the minimum severity level that log messages
must have to be sent to the persistent log.
logging persistent
size
Sets the log size for persistent logging.