Cisco Small Business 200 Series

Quality of Service
Class of Service Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 384
9
67
78
Related Commands
show classofservice ip-dscp mapping
Use this command to display the global IP DSCP mapping to internal traffic
classes.
show classofservice ip-dscp-mapping
Command Modes
Privileged Exec
Examples
The following example shows the first set of DSCP mappings.
(switch) #show classofservice ip-dscp-mapping
IP DSCP Traffic Class
------------- -------------
0(be/cs0) 1
11
21
31
41
51
61
71
8(cs1) 1
91
10(af11) 1
11 1
12(af12) 1
13 1
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user
priority value is mapped.
Command Description
classofservice
dot1p-mapping
Maps an 802.1p priority to an internal traffic class.