Cisco Small Business 200 Series

Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 103
2
Defaults
• hours-offset—0
• minutes-offset—0
• zone acronym—none
Command Modes
Global Config
Examples
The following example configures a timezone offset of –5 hours and a timezone
acronym of EDT.
Switch) (Config)#clock timezone hours -5 zone EDT
Related Commands
clock timezone config dhcp
This command sets the clock operational data to use the time zone details
received from a DHCP server. Use the no form of the command to use manually
configured time zone details in operational data.
clock timezone config dhcp
no clock timezone config dhcp
Default
The switch does not use DHCP to obtain the timezone.
minutes-offset The number of minutes to append to the hours offset. The
range is 0–59.
acronym An acronym for the local timezone, up to four characters.
The acronym is for display purposes only.
Command Description
clock date Sets the date and time manually.
show clock Displays the time and date from the system clock.
Parameter Description