Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 262
5
spanning-tree configuration name
Use this command to set the Multiple Spanning Tree (MST) Configuration Identifier
Name that identifies the configuration that the switch is currently using. Use the no
form of the command to reset it to the default value.
spanning-tree configuration name name
no spanning-tree configuration name
Syntax Descriptions
Default
The default MST configuration name is the base MAC address for the switch.
Command Modes
Global Config
Related Commands
show spanning-
tree
Displays spanning tree settings for the common and internal
spanning tree.
Parameter Description
name A string of up to 32 characters.
Command Description
spanning-tree
configuration
revision
Sets the MST Configuration Identifier Revision Level, which
identifies the configuration that the switch is currently using.
show spanning-
tree
Displays spanning tree settings for the common and internal
spanning tree.
show spanning-
tree interface
Displays spanning tree settings and parameters for an
interface.
Command Description