Cisco Small Business 200 Series

Administration
Syslog
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 140
2
Related Commands
logging console enable
Use this command to enable logging to a terminal connected to the console port.
To stop console logging, use the no form of this command.
logging console enable
no logging console enable
Default
Console logging is disabled.
Command Modes
Global Config
Related Commands
logging console severity
Use this command to limit console message logging to a specified severity level.
Use the no form of the command to set the severity level to the default value (2).
logging console severity serveritylevel
no logging console severity
Command Description
clear logging
buffered
Clears the buffered log.
logging buffered
enable
Enables buffered logging.
show logging
buffered
Displays buffered in-memory logging information and log
entries.
Command Description
logging console
severity
Limits buffered message logging to a specified severity
level.