Cisco Small Business 200 Series

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 270
5
spanning-tree mst instance
Use this command to add a multiple spanning tree instance to the switch. Use the
no form of this command to remove a multiple spanning tree instance from the
switch and reallocate all VLANs allocated to the deleted instance to the common
and internal spanning tree.
spanning-tree mst instance mstid
no spanning-tree mst instance
Syntax Descriptions
Command Modes
Global Config
Related Commands
show spanning-
tree mst port
summary
Displays the settings of one or all ports within the specified
multiple spanning tree instance.
show spanning-
tree mst
summary
Displays summary information about all multiple spanning
tree instances in the switch.
Parameter Description
mstid A number within a range of 1 to 4094, that identifies the
new instance ID to be added/removed.
Command Description
spanning-tree
configuration
name
Sets the MST Configuration Identifier Name, which
identifies the configuration that the switch is currently using.
spanning-tree
configuration
revision
Sets the MST Configuration Identifier Revision Level, which
identifies the configuration that the switch is currently using.
Command Description