Cisco Small Business 200 Series

Administration
PoE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 51
2
Related Commands
show poe port configuration
Use this command to display PoE configuration for a port or all ports.
show poe port configuration {all | interface}
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following shows sample output for all ports on which PoE operation is
available.
(switch1) #show poe port configuration all
Admin Priority Power Power Port Detection
Intf Mode Limit Limit pair Type
(W) Type
---- ------- --------- -------- ----------------- ----- -----------------
e1 Enable low 15.400 class alt-a 4ptdot3af
e2 Enable low 15.400 class alt-a 4ptdot3af
e3 Enable low 15.400 class alt-a 4ptdot3af
Command Description
show poe port
configuration
Displays PoE configuration for a port or all ports.
show poe port
info
Displays PoE status for a port or all ports.
show poe port
statistics
Displays PoE statistics for a port or all ports.
Parameter Description
all Displays PoE configuration for all ports.
interface Displays PoE configuration for the specified port.