Cisco Small Business 200 Series

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 299
7
Related Commands
show mac-address-table multicast
Use this command to display static multicast filtering configuration.
show mac-address-table multicast {macaddr}
Command Modes
Privileged Exec
Examples
The following command displays information on all static multicast filters.
(Switch) #show mac-address-table multicast
Fwd
MAC Address Source Type Description Interface Interfa
ce
----------------------- ------ ------- -------------- --------- -------
--
00:01:01:00:5E:01:02:03 IGMP Dynamic Network Assist Fwd: Fwd:
e24 e24
00:01:33:33:00:00:00:03 MLD Dynamic Network Assist Fwd: Fwd:
e24 e24
Related Commands
Command Description
set multicast
forward-all
Enables forwarding of all multicast packets on a port in a
VLAN.
set multicast
filter-
unregistered
Drops unregistered-multicast-addresses on a port in a
VLAN.
show multicast
filtering
Displays the multicast filtering mode configuration on the
switch.
Command Description
macfilter Adds a static filter entry with MAC-layer station source
address or IP Group Address.