Cisco Small Business 200 Series

Port Management
Flow Control and Storm Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 198
3
show storm-control
This command shows storm control configuration on a port or on all ports.
show storm-control [all | interface]
no storm-control
[all | interface]
Syntax Descriptions
Command Modes
Privileged Exec
Examples
The following shows sample output from the command.
(Switch) #show storm-control
Broadcast Storm Control Mode................... Disable
Broadcast Storm Control Level.................. 5 percent
Multicast Storm Control Mode................... Disable
Multicast Storm Control Level.................. 5 percent
Unicast Storm Control Mode..................... Disable
Unicast Storm Control Level.................... 5 percent
802.3x Flow Control Mode....................... Disable
(Switch) #show storm-control all
Bcast Bcast Mcast Mcast Ucast Ucast
Intf Mode Level Mode Level Mode Level
------ ------- -------- ------- -------- ------- --------
e1 Disable 5% Disable 5% Disable 5%
e2 Disable 5% Disable 5% Disable 5%
storm-control
unicast level
Configures the unicast storm recovery threshold for an
interface.
show storm-
control
Shows storm control configuration on a port or on all ports.
Parameter Description
all Shows storm control information for all ports.
interface Shows storm control information for the specified port
only.
Command Description