Cisco Small Business 200 Series

Administration
Auto Configuration
Cisco Small Business 200E Series Advanced Smart Switch Command Reference 27
2
Syntax Descriptions
Default
No backup file name is configured.
Command Modes
Privileged Exec
Related Commands
boot autoinstall backup-tftp
Use this command to configure the address of a backup TFTP server to be used
when the Auto Configuration process cannot locate the primary server or
configuration file name provided by the DHCP server at startup. Use the no form of
this command to delete the backup server address.
boot autoinstall backup-tftp {server-ip | hostname}
no boot autoinstall backup-tftp
Parameter Description
filename The name of the network configuration file on the backup
TFTP server.
Command Description
boot autoinstall Enables or disables the Auto Configuration feature.
boot autoinstall
backup-tftp
Configures the address of a backup TFTP server to be
used when the Auto Configuration process cannot locate
the server or network configuration file name provided by
the DHCP server at startup.
show autoinstall Displays Auto Configuration status information.